§ 23-71. Preliminary plats.  


Latest version.
  • (a)

    The preliminary plats shall be prepared on sheets twenty-four (24) inches by thirty-six (36) inches, regardless of the size of the subdivision.

    (b)

    The scale should be one hundred (100) feet or fifty (50) feet to the inch (one (1) inch equals one hundred (100) feet or one (1) inch equals fifty (50) feet) in cases of large developments which would exceed the dimensions of a sheet at one hundred (100) foot scale.

    (c)

    Each subdivision consisting of three (3) acres or more shall be prepared on a topographic base map showing contours at intervals not greater than five (5) feet. Any subdivision smaller than three (3) acres which, in the opinion of the city manager, would be affected by the topographical features of the terrain shall also show contours at two (2) foot intervals. All topographical maps shall be based on sea level data.

    (d)

    The following data will be shown on the preliminary plat:

    (1)

    Record lot lines, survey abstract lines, corporation lines and the location of existing utility easements, streets, highways, expressways and freeways traversing, abutting or within a reasonable distance.

    (2)

    The proposed locations, widths and names of streets, proposed locations and widths of alleys, easements, walkways, open channels and lots.

    (3)

    The title of subdivision or addition, name of subdividers and engineer, surveyor, or planner, platting the tract.

    (4)

    The names and areas of large tracts and/or lot dimensions and addition names of all property abutting or adjoining the subdivision and across the street.

    (5)

    The north point, scale and data.

    (6)

    Lot or tract numbers and/or city block numbers, addition names, dates recorded.

    (e)

    All preliminary and final plats shall be printed on good grade processed paper blue line or direct black and white.

    (f)

    All plats shall be drawn with north directions to the top or left side of the map.

    (g)

    The proposed building lines shall be shown in conformation with the zoning ordinance or provisions herein.

(Ord. No. 7718, § 1(VII)(A), 8-18-77)